Jump to content

DMT


Shirtless Crackhead

Recommended Posts

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
  • 1 month later...
  • 2 months later...

Here's my simplification of Noman's tek, for making DMT.

 

You'll need pulverized mimosa hostilis root bark (bits of bark smashed up in a blender, use a mason jar attached to a blender base), or powdered mimosa hostilis root bark.

 

You'll need a large plastic jug (jugs with tapered tops will be better, as it makes separation easier) with tight fitting lid, measuring stuffs, pipettes or a syringe that can pull small amounts of fluid off the top of another fluid.

 

Combine in the plastic jug, make sure that it's completely clean of any contaminations.

 

15ml of distilled water and 1 gram of Lye (sodium hydroxide, solid drain cleaner, the kind you buy at a hardware store); for every gram of bark.

 

NOTE: You should probably go with atleast 50grams of bark powder.

 

Mix the water and bark together first, then add the lye.

 

CAUTION: Lye is extremely dangerous and will fuck you up, have ammonia handy for any spills, wear a mask and eye protection if your worried; but Lye crystals are pretty safe for handling, provided you are not drunk or something.

 

Shake the jug and let it sit there for awhile, shake repeat; do so for atleast 8 hours.

 

Then ad 10ml of Naptha (VM+P, not the lighter fluid kind).

 

Roll the jug, do not shake as it can form an immulsion; warm naptha will work better; leave it out on a warm day, that's perfect.

 

Let the jug stand until the naptha separates to the top, this won't take too long.

 

Carefully pull with pipette or syringe the naptha off the top, do not get any of the brown lye water in this stuff, as it will fudge everything for ya. If it gets in the pipette or syringe, just put it all back into the jar, and clean the pipette/syringe with distilled water.

 

Place this naptha solution in a mason jar.

 

Do this three times, put it all in the same jar, obviously.

 

The last one, leave the naptha in the jug for a day or two, and roll it every couple of hours; you can do this as a 4th time and use a separate collection jar.

 

Put the jar in a freezer, set to the coldest setting; the colder the better.

 

Go to bed, when you wake up, atleast 8 hours later, 12 is better, even longer best. There will be white crystals on the jar.

 

Poor the solvent (naptha) into another jar through a couple coffee filters to catch any loose crystals; stick the filters back in the freezer, this step can be skipped.

 

Leave the jars out to dry for awhile, to get rid of any remaining naptha, then scrape out the DMT goodness.

 

IMPORTANT: The crystals should be white, if they are yellow or something, you'll need to recrystalize/wash them. If anybody does need this, let me know and I'll explain how to do that, but if you use clean equipment and don't mess anything up, this shouldn't come up.

 

~

 

You'll need something like The Machine to smoke (more accurately vaporize) the DMT, don't just light it up; as flame will destroy the DMT and you won't get anywhere.

 

Make sure you are in a safe comfortable place, preferably avoiding loud noise/music, bright lights, etc.. (silence is golden, as you will be in for one helluva trip) in a good mood; and if at all possible with a good friend there to make sure your ok. Sit down and don't get up, it's not a good idea, to both physical and mental health.

 

When you do the stuff, hold the hits for 10 seconds, try to get 2-3 good hits; you'll have about 30 seconds before your body builds it's tolerance up and won't absorb anymore DMT, this will reset after an hour or so; smoking DMT more than once in an hour won't get you anywhere.

 

A good dose is between 40-50mg, go 50-60mg if you ask me.

 

Prepare your mind and body for win.

Link to comment
Share on other sites

  • 1 year later...

The chemistry stuff is very basic, basically you need to not be retarded and be able to do the following things.

 

#1. Acquire clean and appropriate equipment.

#2. Measure stuff with relative accurately. (doesn't need to be lab precise, but it needs to be close)

#3. Hold a syringe steady enough to draw a separated fluid off the top of another fluid.

 

You'll also need a freezer that gets really fucking cold.

Link to comment
Share on other sites

I have a large freezer and the equipment shouldn't be that hard. But do you think the fact that you didn't go into "hyperspace" is evidence that there are methods of extracting the DMT that are superior to the basic chemistry you used to get it? Or is it just hit or miss or personal biology that makes the diference?
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...